| CASE VERSION |
Current 0.4 to 0.63 A
|
These chokes are made with a toroid core in molypermalloy powder (MPP).
Compared with the iron powder (IP) storage chokes, the MPP types have smaller dimensions, lower
inductance loss and better saturation conditions.
They are mainly used in switched-mode power supplies. They can also be used as RFI suppressors.
TYPES
| Types |
Horizontal |
Vertical |
Rated curent per A |
Rated inductance per µH |
DC resistance ( typical) mΩ |
| Code |
Code |
| 57H14 57V15 |
57H14 0400 | 57V15 0400 | 0,4 | 100 | 220
|
| 57H14 0600 | 57V15 0600 | 0,63 | 80 | 150
|
Technical Data
Rated inductance: at +20°C and 10 kHz, 0.1 mA.
Inductance tolerance: ± 20%
Rated current: referred to 250 V-50 Hz and +60°C ambient temperature
DC resistance: at +20°C
Climatic category: DIN GKC (-40 to +125°C; humidity cat. C)
Approx. weight: 3 g
The chokes are designed and tested in accordance with EN 138100; EN 60938-1
The cases are of flame-retardant plastic material in accordance with UL 94V-0
