| SOCKET VERSION Vertical mounting |
Current 0.4 to 2 A
|
These chokes are made with a toroid core in molypermalloy powder (MPP).
Compared with the iron powder (IP) storage chokes, the MPP types have smaller dimensions, lower
inductance loss and better saturation conditions.
They are mainly used in switched-mode power supplies. They can also be used as RFI suppressors.
TYPES
| Types |
Code |
Rated current A |
Rated inductance mH |
DC resistance ( typical) mΩ |
Dimensions - mm |
Overall dimensions on PCB max |
Approx. Weight g |
Approv. |
| A max |
B max |
| 52V13 SV1P 52V17 SV1P |
52V13 0400 SV1P | 0,4 | 200 | 360 | 19 | 6,5 | 19 X 11 | 8 |
|
| 52V13 0600 SV1P | 0,63 | 150 | 200 | 20 | 6,5 | 19 X 11 | 8 |
|
| 52V13 1000 SV1P | 1 | 100 | 120 | 21 | 7 | 19 X 11 | 9 |
|
| 52V13 1500 SV1P | 1,5 | 80 | 85 | 21 | 7,5 | 19 X 11 | 9 |
|
| 52V17 2000 SV1P | 2 | 150 | 100 | 24 | 8 | 23 X 11 | 12 |
|
Technical Data
Rated inductance: at +20°C and 10 kHz, 0.1 mA.
Inductance tolerance: ± 20%
Rated current: referred to 250 V-50 Hz and +60°C ambient temperature
DC resistance: at +20°C
Climatic category: DIN GKC (-40 to +125°C; humidity cat. C)
Approval VDE
The chokes are designed and tested in accordance with EN 138100; EN 60938-1
The sockets are of flame-retardant plastic material in accordance with UL 94V-0
